Rough Country Control Arm Relocation Kit | Front | Jeep Gladiator JT/Wrangler JL 4WD 18-26

The Rough Country Control Arm Relocation Kit is a front suspension upgrade designed for 2018–2026 Jeep Wrangler JL and Jeep Gladiator JT 4WD models. The kit is engineered to improve suspension geometry on lifted Jeeps by repositioning the factory front control arms to a more favorable angle. By lowering the factory control-arm mounting position by approximately 3 inches, the kit helps restore more natural suspension geometry after lifting the vehicle.

One of the primary benefits of the relocation brackets is the reduction of the front control-arm angle. When a Jeep is lifted, the factory control arms can become positioned at a steeper angle, which can negatively affect suspension movement and ride quality. Relocating the mounting points helps bring the control arms closer to their original operating angle, allowing the suspension to move more naturally and helping improve overall ride characteristics.

The kit can also help improve the front driveshaft angle on lifted applications. Proper suspension geometry is particularly important on Jeeps that have been modified with larger lifts and tires, as changes in suspension height can affect multiple components throughout the drivetrain and suspension. The relocation brackets provide a practical way to address these geometry changes without replacing the factory control arms.

Installation is designed to be straightforward and bolt-on, eliminating the need for major modifications to the Jeep's frame or suspension. The brackets are positioned at the factory control-arm mounting areas and provide a new mounting location that lowers the arms by approximately three inches. This makes the kit a convenient option for Jeep owners looking to improve the suspension geometry of a lifted vehicle while retaining their factory control arms.

Overall, the Rough Country Control Arm Relocation Kit is a practical suspension component for lifted Jeep Gladiator JT and Wrangler JL 4WD builds. Its ability to reduce control-arm angles, improve driveshaft geometry, and enhance ride quality makes it a useful upgrade when correcting suspension geometry after installing a lift. With its bolt-on installation and 3-inch relocation, the kit provides an effective way to optimize the factory suspension layout while maintaining a clean and professional installation.